
A full spectrum CBD vape additive and a ready-to-vape e-liquid are different purchases. An additive is a concentrated ingredient for mixing into a compatible vape liquid. A ready-to-vape product is already blended to its intended strength and flavour, so you can fill a suitable device without calculating a new recipe.
If you want the simplest option, choose a finished e-liquid. If you already have a compatible liquid and want to customise its cannabinoid content, an additive offers more control. A higher number on the additive bottle does not make it a direct substitute for a finished vape juice.
This guide compares Canavape’s Full Spectrum Vape Additive Shot with ready-to-vape liquids such as Canavape Complete. It focuses on how the products are used, how mixing changes concentration and what to check before ordering.
| Question | Full Spectrum Vape Additive Shot | Ready-to-vape e-liquid |
|---|---|---|
| What is it for? | Customising a compatible e-liquid | Filling a suitable pod or tank as supplied |
| Does it need mixing? | Yes: follow the product’s compatibility and mixing instructions | No additive is required |
| Canavape example | 1200mg or 2400mg total cannabinoids in 10ml | Complete: 1800mg total cannabinoids in 50ml |
| Concentration before mixing | 120mg/ml or 240mg/ml combined cannabinoids | Complete example: 36mg/ml combined cannabinoids |
| Flavour | Flavour-neutral, with possible hemp notes | Finished flavour or terpene profile |
| Main consideration | Final recipe, volume and compatibility | Flavour, supplied strength and device suitability |
See the current Full Spectrum Vape Additive Shot and Canavape Complete range for the product details behind this comparison. Specifications were checked on 16 November 2026.
A full spectrum CBD vape additive is a concentrated cannabinoid liquid designed to be mixed into suitable vape juice. You may also see it described as a shot, booster or e-liquid additive.
Canavape’s product is supplied in a 10ml bottle, with a choice of 1200mg or 2400mg total cannabinoids. Its listed profile includes CBD, CBG, CBDV, CBC and other hemp-derived compounds. Those headline milligrams describe combined cannabinoids, rather than CBD alone.
The format is useful when you want to change a compatible liquid’s cannabinoid content while keeping control over the amount you add. It creates an extra preparation step: you need to measure, calculate and mix before filling your device.
“Full spectrum” describes the formulation profile. It does not mean that every brand’s extract has identical ingredients, that the product produces a THC-like high, or that a wider profile guarantees a particular result. Check the current product description rather than relying on the term alone.
A ready-to-vape liquid is supplied as a finished formulation. Its flavour, base ratio and stated cannabinoid concentration are already set. You do not need a booster to make it usable.
For example, Granddaddy Purple Canavape Complete contains 1800mg total cannabinoids in 50ml, or 36mg/ml. It combines a full-spectrum CBD and CBG formulation with a terpene profile and a 70:30 PG/VG base.
Ready to vape does not mean suitable for every device. You still need compatible refillable hardware and must follow the instructions for filling, priming and operation. It simply means that mixing another liquid into the bottle is optional rather than required.
Our guide to CBD shortfills explains how the amount of liquid supplied differs from the physical capacity of the bottle.
Canavape’s Full Spectrum Vape Additive Shot is intended for mixing into compatible e-liquids. Treat it as an additive and follow that instruction rather than pouring it straight into a pod as though it were a standard finished liquid.
The 2400mg option contains 240mg combined cannabinoids per ml before mixing. A high concentration makes measuring the amount and checking the final formulation especially important.
If you want a bottle you can use without blending, choose a ready-to-vape product from the CBD e-liquid range. Do not use oral CBD oils or tinctures as an alternative mixing base.
Canavape’s current guidance recommends compatible vape liquids containing at least 50% PG. Suitable starting points include the compatible Canavape e-liquids described on the additive listing. Do not assume every shortfill or high-VG liquid is a suitable base.
Check both products. The additive instructions tell you which bases it is designed for, while the base liquid’s description tells you its formulation and intended use. The finished blend must also suit your device.
If you are uncertain about a particular combination, ask Canavape before mixing. A bottle having spare space does not, by itself, confirm that any ingredient can be added.
Final combined cannabinoid concentration = total cannabinoid milligrams in the mixture ÷ final liquid volume in ml.
Add the milligrams from both liquids, then add their volumes. Do not divide by the original bottle volume after pouring in a shot. The examples below use nominal liquid volumes and are arithmetic illustrations, not suggested personal doses.
Mix 10ml of the 1200mg additive with 50ml of a compatible cannabinoid-free vape base. The mixture contains 1200mg in approximately 60ml: 1200 ÷ 60 = 20mg/ml.
Mix 10ml of the 2400mg additive with 50ml of a compatible cannabinoid-free base. The mixture contains 2400mg in approximately 60ml: 2400 ÷ 60 = 40mg/ml.
If a compatible 50ml e-liquid already contains 1800mg total cannabinoids, adding the full 10ml 1200mg shot creates approximately 60ml containing 3000mg: (1800 + 1200) ÷ (50 + 10) = 50mg/ml.
Using the 2400mg shot instead creates approximately 60ml containing 4200mg: (1800 + 2400) ÷ 60 = 70mg/ml. Check bottle space and compatibility before making any mixture.
| Starting liquid | Additive | Approximate final volume | Combined concentration |
|---|---|---|---|
| 50ml, 0mg cannabinoids | 10ml, 1200mg | 60ml | 20mg/ml |
| 50ml, 0mg cannabinoids | 10ml, 2400mg | 60ml | 40mg/ml |
| 50ml, 1800mg cannabinoids | 10ml, 1200mg | 60ml | 50mg/ml |
| 50ml, 1800mg cannabinoids | 10ml, 2400mg | 60ml | 70mg/ml |
The calculation describes the liquid in the bottle. It does not establish the amount absorbed from a puff or tell you what concentration is personally appropriate.
No. Adding cannabinoids always increases the total milligrams, but the added liquid also increases the volume. Whether concentration rises depends on how concentrated the shot is compared with the starting liquid.
A simple hypothetical example shows the difference: 10ml at 60mg/ml contains 600mg. Adding 10ml at 20mg/ml produces 20ml containing 800mg, which is 40mg/ml. The total rises while the concentration falls.
This is why you should calculate the finished mixture rather than assuming every addition makes a liquid stronger per ml.
It can. Canavape describes its additive as flavour-neutral, but its hemp-derived ingredients may contribute a subtle natural note. “Flavour-neutral” does not promise that every mixture tastes exactly like the original liquid.
Adding 10ml to 50ml also dilutes the original flavouring across a larger volume. The outcome depends on the base, the amount added and your taste preferences.
If you want a finished terpene profile without adjusting the recipe, a ready-to-vape Complete liquid is more straightforward. Our guide to CBD vape flavours can help you compare the aromatic styles.
A finished e-liquid has fewer steps. You choose the flavour and supplied strength, then use it according to its instructions in suitable hardware. This is often the simplest route for someone buying a refillable CBD setup.
An additive makes sense when you have a specific reason to customise a compatible liquid and are comfortable with measurements. The flexibility comes from making a deliberate recipe, not from adding an unmeasured splash directly to the pod.
After mixing, label your bottle with the ingredients, volumes, calculated concentration and mixing date. Shake thoroughly as instructed before filling your device. Keep original product information so the blend remains understandable later.
Choose hardware for the finished liquid, not the additive bottle. Once properly mixed, the blend needs a refillable device compatible with its base ratio and formulation.
Canavape lists the Joyetech EVIO M Pro among its refillable options. Follow the relevant pod and device instructions, allow a fresh coil to saturate and avoid assuming maximum power will improve the result.
If you prefer prefilled cartridges, remember that they are a different format. A bottled additive is not automatically suitable for opening and topping up a sealed cartridge.
Neither is universally better. Choose ready-made liquid for convenience and a fixed formulation. Choose an additive when you want to customise a compatible base and can measure the mixture accurately.
Not necessarily. Follow the product’s instructions and calculate the amount you intend to add. A partial amount needs reliable measurement; the size of a drop is not a dependable universal unit.
Only if the bottle has enough actual capacity for the combined volume. A label stating 50ml tells you the supplied liquid quantity, not necessarily how much spare room the container has. Use a suitable mixing bottle if needed.
For this additive, the headline is total cannabinoids. Do not relabel the combined amount as CBD alone. Refer to the current product information for its cannabinoid profile.
No. Mixing consumer vape products does not turn them into prescribed cannabis treatment. These products should not be presented as treatments for medical conditions.
If you want a straightforward refill, start with ready-to-vape Canavape Complete or another suitable finished e-liquid. If you want to customise a compatible liquid, compare the strength options on the Full Spectrum Vape Additive Shot listing and calculate the final blend before mixing.
For help assembling the full setup, our CBD vape buying checklist covers the product and hardware details worth checking before ordering.
For related guidance, read the 10ml range versus Canavape Complete and reading CBD vape strength in mg/ml.
Product information checked on 16 November 2026. Mixing examples explain concentration, not a recommended dose. Follow current product instructions. For adults aged 18 and over.
Message us directly
I will be back soon