FREE UK DELIVERY ON ORDERS £50+
Canavape logo
£0.00 0

Basket

No products in the basket.

Continue shopping

CBD Vape Additive Mixing Table: Calculate Your Final Strength

CBD vape additive mixing guide with illustrative bottles, a measuring cylinder and calculator on a desk

Table Of Contents

To calculate CBD vape additive strength, add the cannabinoid amounts in the base and shot, then divide by the total liquid volume. The extra liquid matters as much as the extra milligrams. A 1200mg shot added to 50ml creates approximately 60ml, rather than leaving the denominator at 50ml.

This mixing table focuses on the arithmetic behind Canavape’s 1200mg and 2400mg full-spectrum additive options. It explains combined cannabinoid concentration, including when the starting liquid already contains cannabinoids. These are formulation examples, not suggested personal doses or a promise that every combination is compatible.

Before calculating: is this an additive or a finished liquid?

An additive is a concentrated mixing ingredient. A ready-to-vape e-liquid is already formulated for use as supplied in suitable hardware. Adding a shot is optional; a larger bottle does not automatically need one.

Read our full-spectrum additive versus ready-to-vape comparison if you are still deciding between those formats. Confirm the exact product and current mixing instructions before opening the bottle.

The final-strength formula

Final combined mg/ml = (base cannabinoids in mg + additive cannabinoids in mg) ÷ (base volume in ml + additive volume in ml).

Use amounts for the liquid actually being mixed. If you use part of a shot, calculate the milligrams in that measured portion, rather than adding the whole bottle’s stated amount. If you use part of the base bottle, do the same for its contents.

For example, a 10ml shot containing 1200mg combined cannabinoids supplies 120mg per ml. A measured 2ml portion contains 240mg. A 2400mg shot in the same bottle volume supplies 240mg per ml, so 2ml contains 480mg.

1200mg and 2400mg shots: what is being counted?

The checked Canavape Full Spectrum Vape Additive Shot comes in 10ml bottles containing either 1200mg or 2400mg combined cannabinoids. Its listed profile includes CBD, CBG, CBDV, CBC and other hemp-derived compounds.

Those headline totals are not declarations that every milligram is CBD alone. In this article, “combined mg/ml” keeps the unit consistent with the product information. To calculate CBD-only concentration, you need the individual CBD amounts for both liquids.

Shot optionLiquid suppliedCombined cannabinoidsCombined concentration
1200mg full spectrum10ml1200mg120mg/ml
2400mg full spectrum10ml2400mg240mg/ml

Product specifications were checked on 16 November 2026. Refer to the current listing and available batch information when making your own comparison.

Mixing table: adding a shot to 50ml with no cannabinoids

The following table assumes the starting 50ml contains none of the cannabinoids being counted. It also assumes a compatible formulation. Volumes are approximate, and the concentration figures are rounded to two decimal places.

Shot amount addedFinal volumeWith the 1200mg shotWith the 2400mg shot
1ml51ml120mg total; 2.35mg/ml240mg total; 4.71mg/ml
2ml52ml240mg total; 4.62mg/ml480mg total; 9.23mg/ml
5ml55ml600mg total; 10.91mg/ml1200mg total; 21.82mg/ml
10ml60ml1200mg total; 20mg/ml2400mg total; 40mg/ml

These are final concentrations only because the starting base contributes zero cannabinoids. When the base already contains cannabinoids, the same figures represent the shot’s contribution per ml of the finished blend, rather than its complete strength.

What if the starting e-liquid already contains cannabinoids?

Include the starting amount in the numerator. For an example using a complete bottle, the checked Granddaddy Purple Canavape Complete contains 1800mg combined cannabinoids in 50ml, equivalent to 36mg/ml before adding anything.

Example blendCombined totalFinal volumeFinal combined concentration
50ml Complete + full 1200mg shot1800 + 1200 = 3000mg60ml50mg/ml
50ml Complete + full 2400mg shot1800 + 2400 = 4200mg60ml70mg/ml

A common mistake is to add 20mg/ml or 40mg/ml directly to the original 36mg/ml. That gives the wrong result because the original cannabinoids are now spread through 60ml. The base contribution becomes 1800 ÷ 60 = 30mg/ml, before including the shot.

Another mistake is to divide 3000mg by the original 50ml. That ignores the shot’s 10ml volume and overstates concentration. Add the milligrams and volumes separately, then divide once.

Calculating a partial bottle or a small measured portion

The same method works without using a full shot. Suppose you have 10ml of a compatible e-liquid containing 600mg combined cannabinoids and add 1ml of the 1200mg full-spectrum shot. The portion contributes 120mg, giving 720mg in approximately 11ml: about 65.45mg/ml combined.

This example illustrates why adding an ingredient with twice the starting concentration does not double the finished concentration when only a small amount is added. The result depends on both volumes.

Measure by volume using suitable marked equipment and the supplier’s instructions. Counting drops is not a reliable substitute for a measured ml value: drop size can vary with the bottle and liquid. Do not mix directly in a small pod where measuring and distributing the ingredients are difficult.

Ratios and concentration answer different questions

A CBD:CBG ratio describes how two named cannabinoids compare. Combined mg/ml describes the total amount being counted per unit of liquid. Neither figure replaces the other.

A 1:1 shot will not necessarily make an existing CBD-heavy liquid 1:1. You would need to add the CBD and CBG amounts separately. Our 1:1 CBD and CBG guide explains that calculation, while the CBD vape strength guide in mg/ml covers bottle comparisons.

Compatibility checks the arithmetic cannot perform

A mathematically correct result is not proof that a mixture will remain suitable for vaping. Canavape’s full-spectrum additive listing recommends compatible 50:50 liquids or bases containing at least 50% PG. Check the named PG/VG order, the base ingredients and the specific additive guidance.

Do not assume a high-VG cloud liquid becomes compatible simply because a shot is added. Without knowing the shot’s complete carrier proportions, you cannot accurately calculate the finished PG/VG ratio. Oral CBD oils, MCT tinctures and undiluted terpenes are not substitutes for a formulated vape additive.

Allow enough bottle capacity for the final volume and space for mixing. Shake thoroughly according to the product instructions, allow the blend to settle as directed and shake again before refilling. If a blend behaves unexpectedly, stop and ask the supplier before using it.

Write down the finished blend

  • Record the base name, volume and original cannabinoid amount.
  • Record the exact additive option and measured amount used.
  • Calculate the approximate finished volume and combined mg/ml.
  • Keep individual CBD and CBG figures separate where those are supplied.
  • Label the mixed bottle clearly with its contents and mixing date.
  • Keep the original product details and instructions available.

A written note makes later comparisons easier, especially if several similar bottles are kept together. Store sealed and away from direct sunlight, children and pets, following the products’ storage and shelf-life instructions.

Frequently asked questions

Does a 1200mg shot make every bottle 1200mg?

It contributes 1200mg when the entire shot is used. The finished bottle total also includes any cannabinoids already present, and its concentration depends on the combined volume.

Can I use a full 10ml shot in a 50ml bottle?

Check the bottle’s actual capacity. A container already holding 50ml may not have room for another 10ml and adequate mixing space. A nominal container capacity and the amount supplied are different measurements.

Does a higher mg/ml figure tell me how much is absorbed?

No. It describes liquid concentration. It does not establish a dose per puff, absorption or a guaranteed result. Hardware and use introduce further variables.

Can I vape the concentrated shot by itself?

The Canavape additive discussed here is intended for mixing into compatible e-liquid. Follow the current instructions rather than treating it as a standard ready-to-vape bottle.

Check the blend before choosing hardware

Start with a compatible formulation, calculate its concentration and then choose suitable hardware. The MTL vs DTL guide explains why the exact liquid and pod matter more than a draw-style label. If you prefer to skip mixing, compare Canavape’s ready-to-vape bottle formats.

If a mixed liquid behaves poorly in your device, review our refillable pod leak checks and guide to replacing a worn CBD vape pod. A concentration calculation does not replace those compatibility and condition checks.

Product examples checked on 16 November 2026. Calculations describe formulation, not personal dosing. Follow current liquid and hardware instructions. For adults aged 18 and over.

Share:
Canavape

Canavape

Message us directly

I will be back soon

Canavape
Full Spectrum Cartridges
CBD Oils
Customer Reviews

Need anything else? Message us on WhatsApp.
WhatsApp